QUEEN 9

QUEEN 9

It is the choice of those who need maximum strength and power. Queen9 is distinguished by its 900 mm depth, a 20/10-thick work surface, double-crown burners, and the use of elegant stainless steel with a Scotch Brite finish. Details that not only offer maximum functionality and aesthetics, but also take into account the practical and ergonomic needs of those who work. The extreme freedom of composition allows top models to be combined with accessorizable oven and neutral base units, even with hygienic finishes. With more than 350 models immediately available in the catalog, Queen9 is already ready to start giving its best. In addition, all equipment that makes up a Queen9 kitchen is certified in compliance with international standards, including CE, GAR, AGA and others.

GAS RANGES

Entirely moulded top made from thick stainless steel plate. Enamelled cast-iron grills with long spokes for easy...

WOK GAS

Stainless steel outer coverings and feet. Available with 10 kw or 14 kw burners. Fireplace for heat venting. Tops...

TALENT

AISI 304 work surface and dashboard. "Thermoblock" heating elements: armored heating elements included in an aluminum...

ELECTRIC COOKERS WITH...

All-molded hob made from a single sheet of thick stainless steel. Cast-iron radiant plates, fixed watertight to...

GLASS-CERAMIC COOKERS

Unbreakable watertight glass-ceramic top. Cooking zones marked with 27x27 cm square silkscreen printing. 4 kw single...

INDUCTION RANGES

Stainless steel outer shells and feet. Height of the work surface adjustable from 840 to 900 mm. Tops with a...

PLANCHA

Two types of healthy and versatile cooking. Direct or indirect cooking with 4 independent zones and a continuous...

GAS SOLID TOPS

Polished cast iron plate with removable central disk. High-power (14 kW) central burner with piezo ignition....

ELECTRIC SOLID TOPS

Chrome molybdenum polished steel cooking plate 1.8 cm thick that is crushproof at high temperatures and also suitable...

GAS FRY TOP SUPREME

Stainless steel outer shells and feet. Height of the work surface adjustable from 840 to 900 mm. Tops with a...

FRY TOP GAS M120

Cooking plate lowered from the plane by 4 cm and tilted 1 cm toward the front of the machine for grease drainage....

ELECTRIC FRY TOP SUPREME

Stainless steel outer shells and feet. Height of the work surface adjustable from 840 to 900 mm. Baking plate 15 mm...

ELECTRIC FRY TOP M120

Cooking plate lowered from the plane by 4 cm and tilted 1 cm toward the front of the machine for grease drainage....

BAIN MARIES

Gas version Stabilized flame burners regulated by thermostatic valves. Piezoelectric ignition. Electric version...

POTATO HEATERS

Superior infrared resistance. Lower resistance under the tank. Temperature adjustable from 30 to 90 °c by thermostat.

MULTI COOKING BRATT PAN

Fixed basin comletely made of steel. Resistances placed under the bottom. Adjustable temperature from 50 to 300°c.

BOILING PANS

Stainless steel outer shells and feet. Height of the work surface adjustable from 840 to 900 mm. Tops with a...

TILTING BRATT PAN

Stainless steel outer shells and feet. Height of the work surface adjustable from 840 to 900 mm. Tops with 2 mm...

PASTA COOKER

Cooking tanks made of AISI 316 stainless steel (an alloy with exceptional corrosion resistance even at high...

FRYERS

Stainless steel outer shells and feet. Working table height adjustable from 840 to 900 mm. Tops with a thickness of 2...

EVO FRYERS

Worktop, cooking tank and dashboard made of AISI 304 stainless steel. Molded cooking vessel with internal profile...

SUPREME GAS GRILLS

Grid height adjustment device on two levels. Canal with drainage hole and removable grease and residue collection....

LAVA STONE SUPREME

Stainless steel outer shells and feet. Height of the work surface adjustable from 840 to 900 mm. Tops with a...

SUPREME ELECTRIC GRILLS

Grid height adjustment device on two levels. Canal with drainage hole and removable grease and residue collection....

NEUTRAL ELEMENTS

Stainless steel compartment can be accessorized with doors, drawers and heating kit. Anti-tip guides for gastronorm...

Active filters

  • Categories: BASIS

REFRIGERATED BASE UNIT 6 DRAWERS - GAS R290A -...

Modello: SNR 40/3M-C2-C2-C2
Codice: SNR 40/3M-C2-C2-C2
MAIN FEATURES External panels, back panel, doors and worktop in stainless steel (with Scotch-Brite satin finish). External base in stainless steel Inner in stainless steel with rounded corners. Cavity with central drain for discharge of washing water Insulation in high density (42 kg/m3 approx.) expanded polyurethane, 50 mm thick, HCFC-free. Copper-aluminum evaporator with cataphoresis anti-corrosion treatment. Painted iron condensing coil with high thermal output Heating element in the door frame. Ergonomic handle throughout full width of door/drawer and magnetic seals on all four sides. Stainless steel feet Ø 2” with adjustable H 150÷200 mm INTERNAL SETUP Snap-in type AISI 304 18/10 stainless steel slides and uprights, completely removable without the need of tools to facilitate cleaning. Every

REFRIGERATED BASE BT -15/-20°C 120CM

Modello: BR912 BT
Codice: BN20702040400

REFRIGERATED BASE 120cm 2 DRAWERS GN 2/1 -...

Modello: BR910 BT
Codice: BN20752040400

REFRIGERATED BASE TNN -2/+8°C 100CM

Modello: BR910 TNN
Codice: BN20751040400

REFRIGERATED BASE 120cm 2 DRAWERS GN 2/1 -...

Modello: BR912 TNN
Codice: BN20701040400
GENERAL FEATURES: Outer sides, backrest, doors and worktop made of stainless steel stainless steel (Scotch-Brite satin finish) Stainless steel outer bottom Fully radiused stainless steel inner lining Containment-molded inner bottom High-density polyurethane foam insulation (approx. 42 kg/m3) 50 mm thick, HCFC-free Copper-aluminum evaporating coil, painted by cataphoresis with non-toxic epoxy resin Condensing coil made of painted iron with high thermal efficiency Anti-condensation heater, placed on the box under the rebate magnetic gasket Ergonomic handle on the full width of the door or drawer and magnetic gaskets on all 4 sides Stainless steel feet Ø 2" adjustable H 150÷200 mm INTERIOR FITTINGS: Stainless steel uprights and guides, positioned interlocking to facilitate cleanability One

REFRIGERATED BASE UNIT 3 DOORS - GAS R290A -...

Modello: SNF-40/3M
Codice: SNF-40/3M
MAIN FEATURES External panels, back panel, doors and worktop in stainless steel (with Scotch-Brite satin finish). External base in stainless steel Inner in stainless steel with rounded corners. Cavity with central drain for discharge of washing water Insulation in high density (42 kg/m3 approx.) expanded polyurethane, 50 mm thick, HCFC-free. Copper-aluminum evaporator with cataphoresis anti-corrosion treatment. Painted iron condensing coil with high thermal output Heating element in the door frame. Ergonomic handle throughout full width of door/drawer and magnetic seals on all four sides. Stainless steel feet Ø 2” with adjustable H 150÷200 mm INTERNAL SETUP Snap-in type AISI 304 18/10 stainless steel slides and uprights, completely removable without the need of tools to facilitate cleaning. Every

REFRIGERATED BASE UNIT 4 DRAWERS - GAS R290A -...

Modello: SNR 40/2M-C2-C2
Codice: SNR 40/2M-C2-C2
MAIN FEATURES External panels, back panel, doors and worktop in stainless steel (with Scotch-Brite satin finish). External base in stainless steel Inner in stainless steel with rounded corners. Cavity with central drain for discharge of washing water Insulation in high density (42 kg/m3 approx.) expanded polyurethane, 50 mm thick, HCFC-free. Copper-aluminum evaporator with cataphoresis anti-corrosion treatment. Painted iron condensing coil with high thermal output Heating element in the door frame. Ergonomic handle throughout full width of door/drawer and magnetic seals on all four sides. Stainless steel feet Ø 2” with adjustable H 150÷200 mm INTERNAL SETUP Snap-in type AISI 304 18/10 stainless steel slides and uprights, completely removable without the need of tools to facilitate cleaning. Every

REFRIGERATED BASE UNIT 3 DOORS - GAS R290A -...

Modello: SNR 40/3M
Codice: SNR 40/3M
MAIN FEATURES External panels, back panel, doors and worktop in stainless steel (with Scotch-Brite satin finish). External base in stainless steel Inner in stainless steel with rounded corners. Cavity with central drain for discharge of washing water Insulation in high density (42 kg/m3 approx.) expanded polyurethane, 50 mm thick, HCFC-free. Copper-aluminum evaporator with cataphoresis anti-corrosion treatment. Painted iron condensing coil with high thermal output Heating element in the door frame. Ergonomic handle throughout full width of door/drawer and magnetic seals on all four sides. Stainless steel feet Ø 2” with adjustable H 150÷200 mm INTERNAL SETUP Snap-in type AISI 304 18/10 stainless steel slides and uprights, completely removable without the need of tools to facilitate cleaning. Every

REFRIGERATED BASE UNIT 2 DOORS - GAS R290A -...

Modello: SNF 40/2M
Codice: SNF 40/2M
MAIN FEATURES External panels, back panel, doors and worktop in stainless steel (with Scotch-Brite satin finish). External base in stainless steel Inner in stainless steel with rounded corners. Cavity with central drain for discharge of washing water Insulation in high density (42 kg/m3 approx.) expanded polyurethane, 50 mm thick, HCFC-free. Copper-aluminum evaporator with cataphoresis anti-corrosion treatment. Painted iron condensing coil with high thermal output Heating element in the door frame. Ergonomic handle throughout full width of door/drawer and magnetic seals on all four sides. Stainless steel feet Ø 2” with adjustable H 150÷200 mm INTERNAL SETUP Snap-in type AISI 304 18/10 stainless steel slides and uprights, completely removable without the need of tools to facilitate cleaning. Every

REFRIGERATED BASE UNIT 2-DOOR - GAS R290A -...

Modello: SNR 40/2M
Codice: SNR 40/2M
MAIN FEATURES External panels, back panel, doors and worktop in stainless steel (with Scotch-Brite satin finish). External base in stainless steel Inner in stainless steel with rounded corners. Cavity with central drain for discharge of washing water Insulation in high density (42 kg/m3 approx.) expanded polyurethane, 50 mm thick, HCFC-free. Copper-aluminum evaporator with cataphoresis anti-corrosion treatment. Painted iron condensing coil with high thermal output Heating element in the door frame. Ergonomic handle throughout full width of door/drawer and magnetic seals on all four sides. Stainless steel feet Ø 2” with adjustable H 150÷200 mm INTERNAL SETUP Snap-in type AISI 304 18/10 stainless steel slides and uprights, completely removable without the need of tools to facilitate cleaning. Every

ELECTRIC OVEN

Modello: Q90FO/E805
Codice: CR1018789

GAS OVEN

Modello: Q90FO/G800
Codice: CR1018799

ELECTRIC OVEN PREPARED FOR TOP LINE

Modello: Q90FO/E800
Codice: CR1018779

NEUTRAL BASE WITH HYGIENIC FINISH H2 M80 - GN2/1

Modello: 90VAH800
Codice: 90VAH800

NEUTRAL BASE WITH HYGIENIC FINISH H2 M60 - GN1/1

Modello: 90VAH600 I
Codice: 90VAH600 I

NEUTRAL BASE WITH HYGIENIC FINISH H2 M40 - GN1/1

Modello: 90VAH400
Codice: 90VAH400

NEUTRAL BASE COMPARTMENT M160

Modello: Q90VA160
Codice: CR1355429

NEUTRAL BASE COMPARTMENT M120

Modello: Q90VA120
Codice: CR1355419

NEUTRAL BASE COMPARTMENT M100

Modello: Q90VA100
Codice: CR1355409

NEUTRAL BASE COMPARTMENT M80

Modello: Q90VA800
Codice: CR1355399

NEUTRAL BASE COMPARTMENT M60

Modello: Q90VA600
Codice: CR1355389

NEUTRAL BASE COMPARTMENT M40

Modello: Q90VA400
Codice: CR1355379

NEUTRAL BASE COMPARTMENT M20

Modello: Q90VA200
Codice: CR1355369