ACCESSORI QUEEN 7

Add Compare

M80 SUPER FRY TOP ACCESSORY HOLDER

Modello: PAFT8
Codice: CR1659249

Support frame for pans and grids for use on Super Fry Top range. AISI304 stainless steel construction. Prepared for installation on splashback. Equipped with ventilation holes for the passage of excess heat.

Quick view

Add Compare

HOLDING GRID FOR FRY TOP

Modello: AGMFT6
Codice: CR1659269

AISI304 stainless steel wire construction. Suitable for installation on accessory stand. Designed for keeping food cooked on the fry top at temperature.

Quick view

Add Compare

KIT 1 BASIN GN1/3 H65 MM

Modello: AKBFT-3
Codice: CR1659379

AISI304 stainless steel construction.

Quick view

Add Compare

KIT 2 BOWLS GN1/6 H65 MM

Modello: AKBFT-2
Codice: CR1659369

AISI304 stainless steel construction.

Quick view

Add Compare

KIT 3 BOWLS GN1/9 H65 MM

Modello: AKBFT-1
Codice: CR1659359

AISI304 stainless steel construction.

Quick view

Add Compare

HOLDING GRID FOR FRY TOP

Modello: AGMFT48
Codice: CR1659259

AISI304 stainless steel wire construction. Suitable for installation on accessory stand. Designed for keeping food cooked on the fry top at temperature.

Quick view

Add Compare

SUPER FRY TOP ACCESSORY HOLDER

Modello: PAFT4
Codice: CR1659229

Support frame for pans and grids for use on Super Fry Top range. AISI304 stainless steel construction. Prepared for installation on splashback. Equipped with ventilation holes for the passage of excess heat.

Quick view

Add Compare

QUEEN 7 M120 ELECTRIC GRILL HUMIDIFIER KIT

Modello: Q7KU12E
Codice: CR1658519

Complete kit for inflowing moisture into the grate heating zone. Controlled water jet inflow with timed button for adjusting the desired water quantity. The water is fed and sprayed instantly through contact with the heating elements. Feed nozzle positioned in the centre of each grid module (1 module on M40 grid, 2 modules on M80 grid, 3 modules on M120 grid). The kit is supplied with the flow regulator with ideal operation at pressures between 1.5 bar and 2.5 bar.

Quick view

Add Compare

QUEEN 7 M80 ELECTRIC GRILL HUMIDIFIER KIT

Modello: Q7KU8E
Codice: CR1658509

Complete kit for inflowing moisture into the grate heating zone. Controlled water jet inflow with timed button for adjusting the desired water quantity. The water is fed and sprayed instantly through contact with the heating elements. Feed nozzle positioned in the centre of each grid module (1 module on M40 grid, 2 modules on M80 grid, 3 modules on M120 grid). The kit is supplied with the flow regulator with ideal operation at pressures between 1.5 bar and 2.5 bar.

Quick view

Add Compare

QUEEN 7 M40 ELECTRIC GRILL HUMIDIFIER KIT

Modello: Q7KU4E
Codice: CR1658499

Complete kit for inflowing moisture into the grate heating zone. Controlled water jet inflow with timed button for adjusting the desired water quantity. The water is fed and sprayed instantly through contact with the heating elements. Feed nozzle positioned in the centre of each grid module (1 module on M40 grid, 2 modules on M80 grid, 3 modules on M120 grid). The kit is supplied with the flow regulator with ideal operation at pressures between 1.5 bar and 2.5 bar.

Quick view

Add Compare

QUEEN 7 M120 GAS GRILL HUMIDIFIER KIT

Modello: Q7KU12G
Codice: CR1658339

Complete kit for inflowing moisture into the grate heating zone. Controlled water jet inflow with timed button for adjusting the desired water quantity. The water is fed and sprayed instantly through contact with the heating elements. Feed nozzle positioned in the centre of each grid module (1 module on M40 grid, 2 modules on M80 grid, 3 modules on M120 grid). The kit is supplied with the flow regulator with ideal operation at pressures between 1.5 bar and 2.5 bar.

Quick view

Add Compare

QUEEN 7 M80 GAS GRILL HUMIDIFIER KIT

Modello: Q7KU8G
Codice: CR1658329

Complete kit for inflowing moisture into the grate heating zone. Controlled water jet inflow with timed button for adjusting the desired water quantity. The water is fed and sprayed instantly through contact with the heating elements. Feed nozzle positioned in the centre of each grid module (1 module on M40 grid, 2 modules on M80 grid, 3 modules on M120 grid). The kit is supplied with the flow regulator with ideal operation at pressures between 1.5 bar and 2.5 bar.